Air suction filters
Vacuum pads / cups
Designed for use in vacuum lines.
Removes 90% or more of all water.
Fits between vacuum cup and ejector/pump.
Prevents expensive damage to pumps or blocking of ejectors.
Slim vacuum ejector.
Can be specified with vacuum on/off valve.
Optional air release (blow off) valve.
Narrow body, lightweight construction.
For different nozzle diameter.
Able to adjust the vacuum pressure for vacuum line.
Three body sizes available.
Bracket and pressure gauge can be mounted from 2 directions.
Compact and lightweight.
Flow rate corresponds to VAC pressure of –80 kPa,
Stepless control of vacuum pressure proportional
to an electrical signal.
Current or voltage input types.
Monitor output as standard.
12V and 24V power versions.
Cylinder for vacuum use.
Hollow piston rod for vacuum line.
Eliminates loose vacuum connection tube.
Non-rotating as standard.
Through rod or cap style with static vacuum port.
Usage: The ZF Series filters are available to protect vacuum
ejectors or pumps from any dust or debris entering the system at
the vacuum cups. Three types are available, Series ZFA, ZFB
One touch fittings for direct connection into vacuum lines.
Easily replaceable elements.
Inlet connector swivels to simplify piping.
Mounting hole in body for attachment to machinery.
Compact and lightweight construction.
Body or box design.
Box type has integral silencer.
Compact and lightweight design.
Choice of 7 nozzle diameters.
Multistage vacuum ejector.
Three stage diffuser for greater efficiency.
Single body or dual body available.
Suction flows up to 200 l/min.
Optional integrated pressure gauge or digital vacuum switch.
Range of diameters from 2mm to 125mm plus elliptical pads.
Choice of 5 different pad shapes and six different materials.
Solid stem or buffer, to cater for varying workplace heights, can be selected.
Rigid pad attachment or ball joint types.
Heavy duty vertical vacuum entry.
Pad diameters: 40mm to 125mm
Ball joint type.
Pad diameter 10mm to 50mm.
With optional buffer.
ZR Modular Vacuum ejector system.
The ZR series is a medium size modular vacuum ejector/ control
system designed for handling larger workpieces or for higher flow
The ZR series comprises four basic modules; the Ejector, the
vacuum filter, the vacuum switch and the Valve unit.
6mm fittings to connect into pipework.
Very lightweight and compact.
Choice of 2 nozzle diameters and 2 vacuum levels.
ZX Modular Vacuum ejector system.
The ZX series is a vacuum ejector/ control system designed for smaller
high precision uses.
The ZX series comprises four basic modules; the Ejector, the vacuum
filter, the vacuum switch and the Valve unit.
In line compact vacuum filter.
Easily replaceable element.
Very compact and lightweight.
Mounting bracket supplied,clip on type.